Design and fabrication of a multideck gari sieving machine
Date
2020-05
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Gari is a very important staple food made from cassava and is eaten in many parts of Africa.
Gari has a granular nature and may contain different sizes of grains ranging from as small as 1
mm to as large as 6 mm. Depending on where and how gari is going to be eaten, specific particle
sizes are desirable. The market value of gari is therefore reduced if a given sample to be bought
has different grain sizes mixed together. To correct this, gari is often sieved into varying particle
sizes using manual methods and this is often slow and laborious. As such, there arises the need
for a machine to sieve gari particles into various sizes which can fit into an existing production
setup and is less expensive than already existing ones on the market. This paper discusses all
parameters which were considered to design a machine to automatically perform this sieving
of the food into 3 distinct grades. A full conceptual design of the machine was developed and
was ready for fabrication. Static and vibration simulations were carried out on parts of the
machine most susceptible to failure and factors of safety between 1.4 and 5 were obtained for
all these parts. Fabrication of the device was started but due to the onset of the COVID-19
pandemic, the fabrication could not be completed.
Description
Capstone Project submitted to the Department of Engineering, Ashesi University in partial fulfillment of the requirements for the award of Bachelor of Science degree in Mechanical Engineering, May 2020
item.page.type
Capstone project
item.page.format
Keywords
gari, sieving machine, food processing, cassava