Design and fabrication of a multideck gari sieving machine

dc.contributor.authorAbayateye, Nene Dornu
dc.descriptionCapstone Project submitted to the Department of Engineering, Ashesi University in partial fulfillment of the requirements for the award of Bachelor of Science degree in Mechanical Engineering, May 2020en_US
dc.description.abstractGari is a very important staple food made from cassava and is eaten in many parts of Africa. Gari has a granular nature and may contain different sizes of grains ranging from as small as 1 mm to as large as 6 mm. Depending on where and how gari is going to be eaten, specific particle sizes are desirable. The market value of gari is therefore reduced if a given sample to be bought has different grain sizes mixed together. To correct this, gari is often sieved into varying particle sizes using manual methods and this is often slow and laborious. As such, there arises the need for a machine to sieve gari particles into various sizes which can fit into an existing production setup and is less expensive than already existing ones on the market. This paper discusses all parameters which were considered to design a machine to automatically perform this sieving of the food into 3 distinct grades. A full conceptual design of the machine was developed and was ready for fabrication. Static and vibration simulations were carried out on parts of the machine most susceptible to failure and factors of safety between 1.4 and 5 were obtained for all these parts. Fabrication of the device was started but due to the onset of the COVID-19 pandemic, the fabrication could not be completed.en_US
dc.description.sponsorshipAshesi Universityen_US
dc.subjectsieving machineen_US
dc.subjectfood processingen_US
dc.titleDesign and fabrication of a multideck gari sieving machineen_US
dc.typeCapstone projecten_US
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
2.59 MB
Adobe Portable Document Format